After builders cleaning

How to remove finger marks -

To remove finger marks a rinse solution is usually sufficient.

Some detergent manufacturers offer special products where

the cleaning action is completed by a care component. Such agents completely remove fingerprints and leave a thin film of the treated surfaces are a uniform appearance. After application should be polished with a dry cloth. The national advisory organizations, whose addresses are listed in the Members give references to products and sources of supply.

For more stubborn dirt itself offers household cleanser that removes limescale and also slight discoloration. After builders cleaning London.Qith demineralized water (as it is used for steam iron and is available in supermarkets) prevents the formation of lime deposits on drying. The surface is then wiped dry. Scouring powders are unsuitable as they scratch the surface.

Severe oil and grease marks can be removed with alcohol and cleaning solvents, eg Alcohol, isopropyl alcohol and acetone, which are safe for stainless steel. It is important to ensure that the dissolved contaminants are not spread evenly through the cleaning process on the surface. The cleaning must therefore repeatedly made with fresh towels until all traces are removed.

Paint and graffiti, there are specific alkaline or solvent-based cleaners. Knives and scrapers are to be avoided, as they can scratch the metal surface.
Much neglected surfaces can be treated with polish,

as is customary, for example, the chromium in cars are nursing. If appropriate, abrasive polishing pastes for the refurbishment of aged car paints are concerned, however, this caution, as they may mark the stainless steel grinding marks.

Another alternative are special stainless steel cleaner containing phosphoric acid, such as those recommended above for the removal of tramp iron contamination. These funds should be handled in each case the entire unit to prevent staining.