Clean carpet company

Your typical clean carpet company provides three types of carpet cleaning service. There are three different types of carpet cleaning services offered for the customer. A Clean Carpet Company customer can expect to be able to use their carpet within four hours of the procedures completion. However, there are processes which will take a shorter amount of time to dry depending on which procedure is chosen. If dry cleaning or the carpet shampooing methods are selected, then the drying time is shorter than the Extraction method. However, if their carpet really needs to be deep cleaned, then the Extraction method is the best way to go. There are three kinds of services provided by Clean Carpet Company one has to consider. Extraction, the carpet dry cleaning method, and carpet shampoo method are used in the professional carpet cleaning businesses. Extraction uses a detergent based chemical designed to deep clean the carpet. Heated water or the cold water are options within this procedure. The heated water is better because the heated water helps loosen dirt and soil from the carpet fibers quicker. The Extraction method will then vacuum up the dirt and soil almost instantaneously. Since the water and chemical and put down first and the vacuum process occurs right behind it in the same machine. However, there are some rigs, especially those which come on a truck which uses two hoses. The first hose puts down the solution and warm water and the second hose will vacuum up the dirt and water. Truck based extraction methods are more effective than portable machine based operations because the truck based machine can produce more vacuum and hotter water, both of which provide for cleaner carpet. Drying time is about 4 hours. Carpet dry cleaning is the second method. The bonnet is a pad attached to the speed floor buffer. This is for surface cleaning when time is a factor for when the room will be used soon after the cleaning. A chemical solution is sprayed on the surface of the carpet and when the it dries to a powder or crystal it can be buffed with the bonnet to clean the surface and the fibers of the carpet. After buffing with the bonnet, vacuuming will restore the carpet to be used immediately. The third process is known as carpet shampoo method. This method used a foam process and reduces the amount of water used, similar to the dry cleaning process. This type of carpet cleaning is ideal for smaller areas to be cleaned because it works best with a hand held brush. It is used on small highly soiled areas of the carpet. It too requires vacuuming after the shampoo has been applied. It can be walked on and used almost immediately.